Tag: grinder

2 x 72 Grinder File Release

With testing complete, drawings updated, and the launch video uploaded it’s now time to release the full design.

GnH-NCR_Grinder_FilesDownload

The link above contains a STEP file of the full assembly along with the PDF assembly drawing and the DXF you’d need to have the flat cut parts fabricated by a waterjet or laser shop. (SendCutSend) With the DXF I’ve left a border on the drawing with the overall sheet dimensions needed. For fabrication shops with automatic quoting you may need to delete this to not get an inverted version of the parts.

This project was a collaboration with Goat n Hammer. The files above are being provided at no cost for anyone that would like to build their own version.

If you’ve got any specific questions feel free to reach out via any of the social media accounts linked on this page.

  • Motor
  • Tracking Adjustment
  • Face Mounting
  • Tooling Arm Sockets
  • Ratcheting Tension Adjust
  • T-Nut/Slot & Tab Construction

Build Progress: Custom 2×72 Belt Grinder

A while back I began work on a project with the fantastic folks at Goat n Hammer and it hit a major milestone today, the laser cut (thanks Big Blue Saw) frame was built up enough that the motor could be mounted and the tilt functionality tested.

Once the grinder build is done the drawings will be updated to reflect any changes I want to make after building the prototype and the drawings along with some build documentation will posted and made freely available.